Collection: VaporWax APC™

Don't Wax. Vaporize It.

 

VaporWax™ instantly produces a long lasting uniquely RADIANT shine. VaporWax will not cover or dull the factory finish.  Continued use of VaporWax on your vehicle will eliminate the need to use soap, wax or polish your car, No soap, polish or clay bar needed between applications. VaporWax will restore color to lightly oxidized paint on older vehicles.


VaporWax's bird proofing prevents permanent damage from "bake on" and allows for easy removal with water only.  

 

VaporWax's breathability prevents clear coat failure caused by conventional wax.

DID YOU KNOW? That in it's natural form carnuaba wax can become a hard as stone? Fact: while carnuaba wax is praised for it's hardness and shine it is one of the hardest waxes to remove from your paint. Carnuaba wax is resistant to hot water, soap and heat to upwards of 150 degrees. It will dull as all natural wax will and require removal. At this point carnuaba becomes your paints worst enemy by suffocating the clear coat causing eventual failure. Removal will require abrasives or chemicals that will take a immediate toll on your paint's finish. google carnauba wax and educate yourself on the realities that are important for you to know if you intend on applying such a substance to your acrylic paint. Knowledge is power.

 
 If you use wax, you probably heard of clay. Both have a negative effect on acrylic paint.
 

Some forums say that the old buffing and waxing method is the only way to fix worn paint, these are the same people who tell you to use abrasives to remove oxidation from your headlights. Think about it, how do you fix acrylic paint with friction and wax?  what part of the process turns wax into paint? Wax is always going to be wax and the paint damage still exists beneath the wax. the forums that promote this process have an agenda the are loaded with sponsors who sell wax. Buffing wax is not going to chemically change it into acrylic paint. The finish product is cosmetic, literally, makeup not unlike the kind sold at cosmetic counters. the old paint is still old paint and the amount of work needed to apply this make up is excessive. Modern analysis reveals serious flaws in that damaging archaic inefficient process on modern acrylic paints. Common sense dictates that there is no renewing or fixing paint with wax preservation of the original finish, this is the design purpose of VaporWax-APC.


 
New paint doesn't come with swirl marks, swirl marks are owner induced.

   

 FEEL THE VAPORWAX DIFFERENCE!

1. PROTECTS, CONDITIONS & PRESERVES the color and finish of NEW VEHICLES.
2. Remove Oxidation and RESTORE COLOR to OLDER VEHICLES.
3. FREEZE PROOF can be stored and applied in the SUB ZERO weather where WAX WOULD FREEZE.
4. Can be applied in DIRECT SUNLIGHT where WAX WOULD BAKE.
5. PREVENTS the formation of OXIDATION on all acrylic surfaces including modern projector headlights
6. Excellent for Nissan / Infiniti new  "SCRATCH SHIELD PAINT" where common wax is Not recommended
7. PROTECTS PAINT AND CHROME AGAINST CORROSION FROM ROAD SALT
8. CREATES AN INSTANT LONG LASTING DEEP MIRROR LIKE SHINE ON ACRYLIC PAINT AND CLEAR COAT, A DIFFERENCE YOU CAN SEE AND FEEL.
9. MADE WITHOUT THE USE OF DULLING YELLOWING ORGANIC WAX, DAMAGING ABRASIVES
10.NOT AFFECTED BY BIRD DROPPINGS, CLEANS OFF WITH CLEAR WATER LEAVING NO ETCH MARKS BEHIND.
11. Will OUT PERFORM ANY method of automotive paint protection used today in the PRESERVATION of the ORIGINAL FACTORY FINISH.
12. GUARANTEED TO NEVER DULL  
13. NEVER build up or have to be removed.
14. VaporWax
does not produce excess waste
15. VaporWax
will NOT BURN and it will NOT FREEZE.
16. VaporWax
does not produce any of the negative side effects associated with the use of common wax.

 

VaporWax can be applied in all temperatures.


    

NOTE: If you are an individual who enjoys rubbing and buffing your paint, putting wax on and stripping wax off, claying and polishing. Dealing with swirl marks, finger prints, water spots and using brand soaps and power buffers, VaporWax™ is NOT the product for you.

 


 

100% PURE LIQUID NON dulling, NON toxic, NON acidic NON abrasive. ACRYLIC PAINT CONDITIONING TARGET SPECIFIC SYSTEM

Directions: VaporWax™ is a concentrate: Shake cylinder / atomizer to activate before each use. Always apply VaporWax™ sparingly to a CLEAN DRY surface. For optimum result, Do not apply to a wet, dirty or waxed surface. All forms of wax is a contaminate and must be removed before applying VaporWax™ APC. Hot Water & Dish washing liquid is our recommended wax stripper prior to conditioning. This step may have to be repeated depending on the thickness of the wax being removed. No wax based products can be used on a VaporWaxed surface. VaporWax™ is not a Wax and does not apply like wax or react like wax to a variety of conditions.

 
 
VaporWax "salt-proofs" chrome and alloy.

 

"Self leveling" means VaporWax™ does not need to be buffed out to get a shine. VaporWax shines instantly. VaporWax APC 360ID is a highly concentrated once a month conditioning treatment, that is wiped into the vehicles painted surface.

*Originally designed for application on Black Cars VaporWax is effective on all colors.

*Both newer & older cars benefit from conditioning the paint with VaporWax APC

VaporWax™ is not adversely affected by tree sap or bird droppings allowing these things to wash off easily with clear water. Hot and cold weather extremes do not present a problem as it applies and performs equally in all seasons reacting with paint at the microscopic level, penetrating on contact producing instant long lasting results. VaporWax APC will, visually reduce, minimize or diminish swirl marks and minor scratches creating a smooth and even shine and will not smudge or smear like wax nor will it highlight finger prints. VaporWax APC does not require removal. Your paint will maintain a unique and radiant, glass like shine long after the conditioning effects have worn off. VaporWax APC is a "Target Specific System" designed to react with acrylic oxidation and paint.

VaporWax™ APC 360ID for Diecast Cars:
This is the Original formula used for full size vehicles, instructions below are applicable for the specified usage For small objects such as collector cars of 1:18 scale and below. Apply two drops of VaporWax™ to damp cloth and squeeze it through before applying to Collector Cars. VaporWax™ is highly concentrated and is not recommended to be used full strength on small objects, always follow instructions for optimum results.






2 products