Automotive Lens Restorer (Deoxidizer) – 8 fl oz (237 mL)
1. Product overview
OneStep ALR® is a professional-grade chemical deoxidizer for plastic headlight and taillight lenses. It removes oxidation and surface haze to help restore clarity and light output.
- Non-abrasive; no sanding required in normal use
- Designed for shop, fleet, and professional detailing environments
2. Key benefits (summary)
| Use | Exterior plastic (polycarbonate/acrylic) lenses |
| Action | Dissolves oxidation and surface staining |
| Abrasives | None (chemical deoxidizer) |
| Result | Clearer lenses, improved light transmission |
| Work time | Approx. 1–3 minutes per lens (condition-dependent) |
| Avoid on | Painted surfaces, glass, interior plastics |
3. Surface prep
- Work on cool lenses, out of direct sun.
- Wash lens with mild car wash or detergent; rinse and dry fully.
- Mask surrounding paint, trim, and rubber with painter’s tape (recommended).
4. Use instructions
Light–moderate oxidation
- Shake well before use.
- Apply a small amount of OneStep ALR® to a clean microfiber or foam applicator.
- Work over the lens in overlapping circular or cross-hatch motions using firm, controlled pressure. Keep the area lightly wetted with product; do not allow to dry.
- Allow brief dwell (up to 60 seconds) while continuing to move product.
- Wipe off residue with a clean, dry microfiber towel.
- Inspect under good lighting and repeat as needed for heavier oxidation.
Optional: Follow with a UV-resistant sealant or coating to help maintain clarity.
5. Quick reference
| Step | Action | Notes |
|---|---|---|
| 1 | Clean & dry lens | Remove dirt, film, and loose buildup |
| 2 | Mask surrounding areas | Protect paint and trim (recommended) |
| 3 | Apply to applicator | Use small amounts; reapply as needed |
| 4 | Work product on lens | Firm, even pressure |
| 5 | Wipe off & inspect | Repeat on stubborn oxidation |
| 6 | Apply UV protection (optional) | Recommended for long-term results |
6. Safety
For professional use. Read before use.
PPE
- Wear chemical-resistant gloves.
- Wear safety glasses or goggles when splashing is possible.
- Avoid prolonged skin contact.
First aid
- Eyes: Rinse with water for several minutes. Remove contacts if easy. Get medical attention if irritation persists.
- Skin: Wash with soap and water. Remove contaminated clothing. Seek advice if irritation develops.
- Inhalation: Move to fresh air. If symptoms occur, seek medical attention.
- Ingestion: Do not induce vomiting. Rinse mouth. Get medical attention immediately and show label/SDS.
Handling & storage
- Keep container tightly closed.
- Store in a cool, dry, well-ventilated area away from heat and direct sunlight.
- Do not freeze.
- Keep out of reach of children.
7. Technical data (typical)
| Product type | Non-abrasive automotive lens deoxidizer |
| Substrate | Polycarbonate/acrylic exterior lenses |
| Use temp range | 50–90°F (10–32°C), out of direct sunlight |
| Package size | 8 fl oz (237 mL) |
| Part / SKU | OSTEP‑8OZ |
*Values are typical and not specifications.
8. Disposal
Dispose of unused product and empty containers according to local, state, and federal regulations. Do not pour into storm drains, soil, or surface waters.
9. Contact
PittmanOriginal®
Email: info@pittmanoriginal.com
For SDS or technical support, visit our website or contact support.